SP-540i / SP-300i

ROLAND SP-540i / SP-300i

Preuzmite kontrolu!!

Uspeti danas u poslu, medju jakom konkurencijom, zna?i proizvoditi kvalitetan promotivni materijal uz što manje utrošenog vremena i novca. Kao i mnogim drugim firmama, može Vam se desiti da je zainteresovanost za Vaše grafike promenljiva. Ako je ovo slu?aj, onda je vreme za promene!
Rolandovi VersaCAMM printeri/kateri su pravi izbor za Vas! Sa VersaCAMM mašinama, uživa?ete u neuporedivom kvalitetu štampanja u ?etiri boje, velikoj brzini izrade grafika i automatskom štampanju i isecanju po konturama, sve u jednom ure?aju. Najbolje od svega, bi?ete potpuno opremljeni za proizvodnju kvalitetnih nalepnica, postera i ostalog promotivnog materijala potrebnog za Vaš posao.
Preuzmite kontrolu sa VersaCAMM mašinama!

Oživite svoje promotivne aktivnosti

VersaCAMM printeri/kateri pružaju bezbroj mogu?nosti za kreiranje razli?itih aplikacija. Samo jedan ure?aj može proizvoditi stikere i razne druge nalepnice, postere, POP, auto-grafiku, termo-preslika?e za ode?u i druge promotivne artikle u svim veli?inama, na zahtev, i za unutrašnje i spoljašnje prikazivanje. Tako?e, podržavaju široki spektar materijala, uklju?uju?i samolepljivu foliju, baner, papir, film, tarpolin i termo-prenosivi papir.

Postignite profesionalnni kvalitet bez posebnih veština

Sa VersaCAMM, možete posti?i profesionalni kvalitet ?ak i bez bilo kakvog prethodnog iskustva. Rolandova Intelligent Pass Control tehnologija automatski postiže suptilne gradacije i neprozirne boje kakve ste želeli. Ekološki pogodna ECO-SOL MAX tinta daje žive boje i otpornu grafiku.

Uživajte u raznovrsnosti štampanja i digitalnom isecanju, sve na jednoj mašini

Sa VersaCAMM mašinama, jednostavno je kreirati unikatne grafike po želji klijenta, koje privla?e pažnju. Koriste?i Adobe Illustrator, lako možete iscrtati konturne linije po kojima ?ete se?i grafiku u bukvalno bilo kojem obliku. VersaCAMM ?e automatski štampati i se?i Vaš dizajn. Roland DG je pionir u print&cut tehnologiji i do danas je u svetu prodato preko 105,000 Rolandovih printera/katera (prema podacima iz jula 2012), ?ine?i Roland vode?im brendom za print&cut inkjet ure?aje.

Intuitivan Rolandov operativni softver dolazi uz mašinu

Svaki VersaCAMM ure?aj ide uz VersaWorks, Rolandov RIP sofver za profesionalni kvalitet štampe. VersaWorks sadrži Rolandov kolor sistem za precizno reprodukovanje boja koje ste izabrali iz Rolandovih tabela boja i knjiga uzoraka. Promenljivi podaci štampanja ?ine da se lako kreiraju serije individualizovanih otisaka, zasnovanih na jednom šablonu, ali svaki sa posebnim fotografijama, porukama, brojevima ili imenima. Kao dodatak, VersaWorks procenjuje potrošnju tinte i vreme štampanja za svaku grafiku, pa možete precizno da pratite Vaše vreme I troškove. Tako?e, ovaj softver možete automatski update preko interneta.

Jednostavan za upotrebu i dizajniran u skladu sa Vašim radnim okruženjem

VersaCAMM ure?aji su jednostavni za rukovanje kao i bilo koja druga oprema u Vašoj kancelariji. Njihovo kompaktno postolje dizajnirano je tako da može lako da se uklopi u Vaše radno okruženje. ECO-SOL MAX boje upakovane su u zape?a?ene kertridže koji se vrlo jednostavno koriste i bukvalno su bez mirisa. Uz svaku mašinu dobijate i garanciju za ?uvenu Rolandovu pouzdanost i vrhunsku uslugu i podršku, uklju?uju?i obuku kroz Rolandove radionice i seminare.

ROLAND SP-540i / SP-300i Opcije

ROLAND SP-540i / SP-300i Opcije

	Model	Description
ECO-SOL MAX INK	ESL3-4MG	Magenta, 440 cc
	ESL3-4YE	Yellow, 440 cc
	ESL3-4CY	Cyan, 440 cc
	ESL3-4BK	Black, 440 cc
	ESL3-MG	Magenta, 220 cc
	ESL3-YE	Yellow, 220 cc
	ESL3-CY	Cyan, 220 cc
	ESL3-BK	Black, 220 cc
	SL-CL	Cleaning liquid, 1 pc.
Blades	ZEC-U5022	For thick, reflective and fluorescent vinyl, 2pcs.
	ZEC-U5025	For thick, reflective and fluorescent vinyl, 5pcs.
Blade holders	XD-CH3	Blade holder with blade extension abjuster, made of resin
	XD-CH2	Blade holder with blade extension abjuster, made of aluminum
Automated take-up system	TU2-54	For SP-540i, rolls up to 30 kg (66.1 lb.) Can only be used during printing
	TU2-30	For SP-300i , rolls up to 30 kg (66.1 lb.)*1 Can only be used during printing
	TUC-2	Controller for TU2-54 and TU2-30 take-up systems

ROLAND SP-540i / SP-300i Specifikacija

ROLAND SP-540i / SP-300i Specifikacija

Model SP-540i SP-300i Printing technology Piezoelectric inkjet Media Width 210 to 1,371 mm (8.3 to 54 in.) 182 to 762mm (7.2 to 30 in.) Thickness Maximum 1.0 mm (39 mil) with liner, for printing Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting Roll outer diameter Maximum 180 mm (7 in.) Roll weight Maximum 30 kg (66 lb.) Maximum 20 kg (44 lb.) Core diameter 50.8 mm or 76.2 mm (2 in. or 3 in.) Printing/cutting width*1 Maximum 1,346 mm (53 in.) Maximum 736 mm (29 in.) Ink cartridges Type Exclusive Roland ECO-SOL MAX Capacity 220 cc or 440 cc Colors Four colors (cyan, magenta, yellow, and black) Printing resolution (dots per inch) Maximum 1,440 dpi Cutting speed 10 to 300 mm/s Blade force 30 to 300 gf Blade offset 0 to 1.5 mm (0 to 0.059 in) Software resolution (when cutting) 0.025 mm/step Distance accuracy (when printing) *2 *3 Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater Distance accuracy (when cutting) *3 Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CUTTING MENU] – [CALIBRATION] has been made): Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater Repetition accuracy (when cutting) *3 *4 ±0.1 mm or less Alignment accuracy for printing and cutting *3 *5 ±0.5 mm or less Alignment accuracy for printing and cutting when reloading media *3 *6 Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater Media heating system *7 Print heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F) Dryer, setting range for the preset temperature: 30 to 50°C (86 to 122°F) Connectivity Ethernet (10BASE-T/100BASE-TX, automatic switching) Power-saving function Automatic sleep feature Power requirements AC 100 to 120 V ±10%, 7.6 A, 50/60 Hz or AC 220 to 240 V ±10%, 3.9 A, 50/60 Hz AC 100 to 120 V ±10%, 5.5 A, 50/60 Hz or AC 220 to 240 V ±10%, 2.8 A, 50/60 Hz Power consumption During operation Approx. 1,030 W Approx. 730 W Sleep mode Approx. 14 W Approx. 14 W Acoustic noise level During operation 64 dB (A) or less 64 dB (A) or less During standby 40 dB (A) or less 40 dB (A) or less Dimensions With Stand 2,310 (W) x 740 (D) x 1,125 (H) mm [90.9 (W) x 29.1 (D) x 44.3 (H) in.] 1,700 (W) x 740 (D) x 1,125 (H) mm [66.9 (W) x 29.1 (D) x 44.3 (H) in.] Weight 112 kg (247 lb.) 89 kg (196 lb.) Environmental Power on Temperature: 15 to 32°C (59 to 90°F) [20°C (68°F) or more recommended], Humidity: 35 to 80%RH (non-condensing) Power off Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (non-condensing) Included items Stand, power cord, blade, blade holder, media clamps, media flanges, replacement blade for separating knife, cleaning kit, software RIP, and user’s manual, etc   *1 The length of printing or cutting is subject to the limitations of the program. *2 Using Roland specified media, print travel of 1 m, temperature: 25°C (77°F), humidity: 50%RH *3 Not assured when the print heater or dryer is used. *4 Using Roland specified media, loaded on the shaft, [PREFEED] menu item must be set to “ENABLE,” with 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. SP-540i: Media over 610 mm wide and 4,000 mm long. Media 610 mm wide or less and 8,000 mm long. SP-300i: media 3,000 mm long. *5 Provided that media length is under 3,000 mm. Temperature: 25°C (77°F) Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media. *6 Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,346 mm (SP-540i) or 736 mm (SP-300i) in the carriage-movement direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to “ENABLE.” Temperature: 25°C (77°F) Excludes the influence of misalignment, expansion or contraction of the media. *7 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached depending on the ambient temperature and media width.     Roland VersaWorks System Requirements Operating system Windows® 7 Professional/Ultimate (32/64-bit); Windows Vista® Business/Ultimate (32/64-bit); Windows® XP Professional Service Pack 2 or later (32/64-bit) CPU Core™2 Duo, 2.0 GHz or faster recommended RAM 2 GB or more recommended Video card and monitor A resolution of 1280 × 1024 or more recommended Free hard-disk space 40 GB or more recommended Hard-disk file system NTFS format Optical drive DVD-ROM drive *Roland VersaWorks® is a 32-bit application, which runs on 64-bit Windows® with WoW64 (Windows 32-bit on Windows 64-bit).   Roland VersaWorks-Compatible Application Software Adobe® Illustrator® 10, CS, CS2, CS3, CS4, CS5, CS6 / CorelDRAW® 11, 12, X3, X4, X5

ROLAND SP-540i / SP-300i Video

ROLAND SP-540i / SP-300i Video

SP-i